Initiating Quicklock/Quickblank; Accessing Power Management; Accessing The Battery Gauge; Accessing The Brightness Control - Compaq Armada M700 Series Reference Manual

Initiating QuickLock/QuickBlank

Before QuickLock/QuickBlank can be initiated, a
IMPORTANT:
power-on password must be established and QuickLock/
QuickBlank must be enabled through Computer Setup.
Press the Fn+F6 hotkeys to initiate QuickLock/QuickBlank at any
time and from within any application. These hotkeys
Disable the keyboard and the pointing device.
Clear the display.
To reenable the keyboard and return your information to the
screen, enter your power-on password.

Accessing Power Management

Press the Fn+F7 hotkeys to access Power Management. These
hotkeys let you customize the level of battery conservation, or use
one of the three preset conservation levels.
Use the left or right arrow keys to select a different level.

Accessing the Battery Gauge

Press the Fn+F8 hotkeys to show the status of the battery packs.
Three numbered boxes indicate the status of each installed battery.
Press the right or down arrow key to view the status of the next
battery pack. If a battery pack is not in a bay, the corresponding
bay cannot be selected. Press the left or up arrow key to select the
previous battery pack.

Accessing the Brightness Control

Press the Fn+F10 hotkeys to adjust the screen brightness
with an onscreen slide button or with the arrow keys.
Navigation Devices and Keyboard 3-5