Initiating Calibration; Stopping Calibration - Compaq Armada M700 Series Reference Manual

Initiating Calibration

1. Connect the computer to an external power source.
CAUTION:
remains connected to external power throughout calibration.
2. Turn the computer on.
3. Insert the battery pack into the computer battery bay or
MultiBay.
4. Access the Battery Calibration tab.
5. Select the battery pack needing calibration.
6. Select Start Calibration.
During calibration, a battery calibration icon displays in
NOTE:
the taskbar. A Down arrow displays while the battery pack is
discharging and an Up arrow displays while the battery pack is
recharging.

Stopping Calibration

Calibration will not resume if it is stopped before calibration is
completed or if the computer is shut down during calibration. An
interrupted calibration must be restarted.
To stop calibration, shut down the computer.
Or,
1. Access the Battery Calibration tab.
2. Select the battery pack being calibrated.
3. Select Stop Calibration. This selection is only visible during
calibration.
To prevent loss of data, ensure that the computer
Battery Packs 4-5