Blaupunkt TravelPilot RNS 3 Operating Instructions Manual page 81

Table of Contents

Advertisement

Set-up/Basic settings
Follow these instructions given by the system and
Press the right-hand rotary/pushbutton ;.
You can cancel the process at any time. If you want to end the installation,
Use the right-hand rotary/pushbutton ; to select CANCEL and
Press the right-hand rotary/pushbutton ;.
The previous menu item in the installation will appear.
Following the system test the system will perform the actual calibration. To do
so, you must drive a distance of 8 to 15 km with good GPS reception.
First select the option you require, TYRE CHANGE or NEW INSTALL .
Press the right-hand rotary/pushbutton ;.
Before the process begins, you will be prompted to confirm the deletion of any
old calibration information.
Note: If you select NEW INSTALL, route guidance is not possible
during the first 25% of the calibration process.
The distance you will be required to drive depends on a number of
different factors such as the quality of GPS reception and the route.
The number of kilometres given is only a guideline. The distance
can be much shorter or much longer if conditions are unfavourable.
SVENSKA
DANSK
ENGLISH
249

Advertisement

Table of Contents
loading

Table of Contents