Table of Contents
Advertisement
Instructions
Initial Activation
When purchased the Watch N' Learn is in TRY ME mode
for demonstration purposes. Using the tip of a pencil, press
the RE-SET button located on the lower left side of the
watch. If the display or sound is weak and unclear, please
replace the batterys indicated (see "Fitting a new battery").
The Watch N'Learn is now ready for use. Specific operations
and functions are listed below.
Setting the time
To set the time, press both LEFT and RIGHT buttons
simultaneously. Pressing them once selects the hour. Pressing
them again selects the minutes. When the
correct numbers are flashing use the LEFT
(-) and RIGHT (+) buttons to select the
correct time. When the time is set, press the
ON-DEMAND button to check your setting.
Once the time is set and there is no further user input, the
watch will revert to STAND-BY mode.
Advertisement
Table of Contents
