Single/Double Fan Front Snow Hood Installation - Daikin RZQ18TAVJU Installation Instructions Manual

SINGLE/DOUBLE FAN
FRONT SNOW HOOD INSTALLATION
Front Snow Hood Assembly
1. Unscrew the four (4) screws that are holding the Plastic
grill. Remove front plastic grill (Image 1a below).
• Save the four (4) screws and Plastic grill.
(Image 1a)
2. Loosen the two (2) top screws that are holding the fan
guard to the unit. (Do not remove.)
3. Remove the two (2) bottom screws that are holding the
fan guard to the unit
•
Save the two (2) bottom screws(Image 1b).
4. Install SIDE2 to the condenser unit by placing it behind
the fan guard metal on the top and bottom. Align the
bottom screw hole with the hole in the hood side and
secure using the screw removed in step 3.
•
Push the top of SIDE2 all the way in until it stops and
tighten the top screw (Image 1c).
5. Repeat above step for SIDE1 Installation.(Image 1d)
7
(Image 1b)
(Image 1c)