Daikin RZQ18TAVJU Installation Instructions Manual page 11

CAUTION
When installing SIDE2 use care not to damage the
Condenser Sensor
4. Place SIDE1 and SIDE 2 on top of the top Right and Left
screws (hanging from the screw).
• SIDE1 and SIDE 2
Secure
top screw and using three (3) provided screws
to the condenser unit by tightening the
(Image
(Image 3d)
(Image 3e)
5. Attach TOP1 to SIDE1 and SIDE2 using six (6) provided
screws on the surface; two (2) provided screws on the
bottom. Do not put screws in 2 upper holes (Image 3f).
3d and 3e).
6. Install TOP2 on top and secure using six (6) provided
screws on the surface; four (4) provided screws securing
to TOP 1 (Image 3g).
11
(Image 3f)
(Image 3g)