Table of Contents
Advertisement
Assembly Replacement
Introduction
his chapter describes how to disassemble and reassemble your analyzer for the purpose of
replacing a failed assembly. It also contains speci c instructions for replacing each assembly.
Note
Some individual components of each assembly may also be replaced.
See Chapter 7, \Parts List," for a list of the parts that are available for
replacement.
Warning
Parts of this instrument may have sharp edges. Work carefully to avoid
injury.
equired Tools
ORX drivers, sizes -10 and -15
5/8-inch wrench (for BNC nuts)
5/16-inch wrench (preferably the modi ed wrench included in the service kit)
5/16-inch nut driver (required only for display replacement)
3
Assembly Replacement
3-1
Advertisement
Table of Contents
