5.
Follow step 4-5 of Installing an expansion card to the butterfly riser card bracket
to install the butterfly riser card bracket to the chassis.
6.
Connect the MCIO/miniSAS cables from the HBA/RAID card (A) to the PE2_MCIO_IN1
connector or NVMe/SATA/SAS backplane (B). Refer to the section Backplane cabling
for the locations of the MCIO connectors.
•
The illustration above is for reference only.
•
For more information or assistance, refer to www.asus.com.
ASUS RS700A-E12 Series
2-29