Table of Contents
Advertisement
2.
Firmly hold the tray lever and pull the storage device tray out of the bay.
3.
Prepare the 2.5" storage device and the bundled set of screws.
4.
Place the 2.5" storage device into the storage device tray, and then secure it with four
screws.
5.
Push the storage device tray and HDD assembly all the way into the depth of the bay
until the tray lever and spring lock click and secure the storage device tray in place.
•
When installed, the SATA/SAS/NVMe connector on the storage device connects to the
SATA/SAS/NVMe interface on the backplane.
•
The storage device tray is correctly placed when its front edge aligns with the bay
edge.
6.
Repeat steps 1 to 5 to install the other SATA/SAS/NVMe storage devices.
ASUS RS700A-E12 Series
2-19
Advertisement
Table of Contents
