Powering On/Off the Projector
1. Remove the lens cap.
2. Ensure that both the power cord and signal cable are securely
3. Turn on the power and lamp by pressing the "Power" button
4. Turn on your source (computer, notebook, or video player ,
Turn on the
projector first
followed by the
signal sources.
Powering On the Projector
connected.
on the control panel. The start-up screen will be displayed in
approximately one minute.
etc...); the projector will automatically detect your source.
If the screen displays "No Signal," please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, use the "Source"
button on the control panel to select the desired source.
Lens Cap
11
Installation
Power Button
E
nglish