Image - Optoma H30 User Manual

E
nglish
User Controls
The "Signal" sub
menu is supported
under the Analog
RGB and Analog
YPbPr input
sources.
White Peaking
The white segment control to set the white peaking level of the
DMD chip. " 0" stands for minimal peaking, and "10" stands for
maximum peaking. If you prefer a stronger image, adjust toward
the maximum setting. For a smoother, more natural image, adjust
toward the minimum setting.
Color Temp
The color temp control adjusts the color temperature. The range is
from "1" to "3". At a higher temperature, the screen looks colder;
at a lower temperature, the screen looks warmer.
Image Mode
There are four factory presets optimized for various types of
images.
4
Film : For home theater
4
Video : For video mode
4
Graphic : For graphics
4
PC : For computers or notebooks
Advanced Adjustment
Use or to select R (Red), G (Green), or B (Blue) for brightness
and contrast.
Signal
4
Horizontal: Adjusts the horizontal position.
4
Vertical: Adjusts the vertical position.
4
Frequency: Changes the display data frequency to match the
frequency of your computer's graphics card. If you experi-
ence a vertical flickering bar, use this function to correct the
issue.
22

IMAGE