Adjusting The Projected Image; Adjusting The Projector's Height - Optoma H30 User Manual

Adjusting the Projected Image

Adjusting the Projector's Height

The projector is equipped with an elevator foot to adjust the
projector's height.
To raise or lower the projector :
1. Turn the projector over and locate the elevator foot. Press
the elevator button
adjusted.
2. While holding down the elevator button, adjust the foot to
the desired height,
elevator foot into position.
3. Use to fine-tune tilt-adjustment
4. Lower the projector so it rests on its foot; adjust as
needed.
3
Tilt-adjustment Foot
Installation
to extend the foot so it may be
then release the button to lock the
1
Elevator Foot
13
E
nglish
2