Advertisement
(5) Adjust the leveling screws with a screw driver or a
Allen wrench;
(6) Fully tighten both tripod center bolt and tripod
tray locking knob while monitoring the level.
Convert dovetail saddle: HAZ accepts a Vixen or a
5.
Losmandy-D dovetail mounting bar. The default is
Vixen-type one. Release the dovetail Saddle Locking
Lever and slide the telescope dovetail plate into the
saddle. Make sure that the arrow sign on the saddle
is pointing forward. Tighten the Saddle Locking
Screw.
To convert dovetail saddle from a Vixen-type to a
Losmandy-type.
(1) Remove two socket screws (red circled), flip and
move the saddle fixed block outward.
Leveling screws
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com
(2) Remove locking knobs and flip the sliding blocks
(blue squares).
To convert dovetail saddle for binocular mounting.
Treaded holes for
Saddle screws
(1) Remove dovetail saddle from the adapting plate
by unscrew four socket screws;
(2) Attach the saddle onto the top of the adapting
plate and secure the saddle using two screws.
Saddle
Adapting plate
3
Advertisement
