Installing An Hp Rdx Usb 3.0 External Removable Disk Backup System; Rear View Of The External Drive; Connecting The Power And Usb Cables - HP RDX USB 3.0 Removable Disk Backup System User Manual

3 Installing an HP RDX USB 3.0 External Removable Disk
Backup System
If you are installing an HP RDX USB 3.0 Internal Removable Disk Backup System, please refer to
Installing an HP RDX USB 3.0 Internal Removable Disk Backup System (page
In this chapter:
Rear view of the external drive (page 14)
Connecting the power and USB cables (page 14)

Rear view of the external drive

Figure 9 Rear view of the external drive
1 Power socket
3 Kensington Lock hole

Connecting the power and USB cables

An external HP RDX Removable Disk Backup System will operate using any voltage in the range
100–240 volts (1A, 50-60 Hz). No adjustment is needed.
A USB cable, a power cable and universal adapter are provided with your HP RDX Removable
Disk Backup System.
14

Installing an HP RDX USB 3.0 External Removable Disk Backup System

2 USB port
8).