Advertisement
Once it has loaded the parameter values, those which were updated, will be highlighted in green:
Click Write Changes button to save the updates to the drive.
You will need to recycle the drive for the change to the fan to take immediate effect.
Hitachi VFD Hardwired Analog Installation:
Setup RapidPath Analog Spindle Control
Follow the steps in this link
Analog Spindle
to configure the analog output for spindle control
Setup Analog Output Signal
Follow these steps in this link
Mapping Analog Outputs
setup the analog output signal in Mach
Config
Programming
To be able to program the Hitachi VFD you will either need to change the parameters physically on
the VFD or with the Hitachi ProDrive Next software.
Advertisement
