Yamaha MBK XMAX 2014 Service Manual page 342

3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-131.
OK ↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE TURN
SIGNAL/HAZARD RELAY" on page
8-140.
OK ↓
5. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM (for
YP125R)" on page 8-23 and "CIR-
CUIT DIAGRAM (for YP125RA)" on
page 8-25.
OK ↓
Replace the meter assembly.
The fuel meter, fuel level warning light, or both fail to come on.
1. Check the fuel sender.
Refer to "CHECKING THE FUEL
SENDER" on page 8-145.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM (for
YP125R)" on page 8-23 and "CIR-
CUIT DIAGRAM (for YP125RA)" on
page 8-25.
OK ↓
Replace the meter assembly.
The coolant temperature meter fails to operate.
1. Check the coolant temperature sen-
sor.
Refer to "CHECKING THE COOL-
ANT TEMPERATURE SENSOR"
on page 8-147.
OK ↓
NG →
The hazard switch is faulty. Replace the
right handlebar switch.
NG →
Replace the turn signal/hazard relay.
NG →
Properly connect or replace the wire har-
ness.
NG →
Replace the fuel pump.
NG →
Properly connect or replace the wire har-
ness.
NG →
Replace the coolant temperature sensor.
8-29
SIGNALING SYSTEM