Advertisement
Figure 3 Installing an LSWM2XGT2PM interface card
Removing an interface card
CAUTION:
• Before you remove an interface card, remove the cable from it.
• After removing an interface card, if no new interface card is to
be installed, install the filler panel as soon as possible to
prevent dust and ensure good ventilation in the device.
Removing an LSWM2XGT2PM interface card
1. Prepare an anti-static bag.
2. Use the Phillips screwdriver to loosen the captive screw on the
interface card, as shown by callout 1 in
3. Rotate outward the ejector lever as shown by callout 2 in
4. Pull out the interface card slowly out the interface card slot as
shown by callout 3 in
5. Place the removed interface card in the anti-static bag.
Figure
4.
5
Figure
4,
Figure
4.
Advertisement
