Care, Cleaning & Storage - Breville Smart Tilt Control Instruction Book

Table of Contents

Advertisement

Care, Cleaning
& Storage
Always ensure the main power switch is turned
to the Off position, then switch off at the power
outlet and unplug prior to cleaning the frame,
housing, base and grilles.
To clean the housing, frame and base of the
ceramic heater, wipe with a clean, dry cloth.
Never use an abrasive cleaner.
To clean the grilles and remove dust that may
have accumulated, use a soft, damp cloth or a
vacuum cleaner using the brush attachment.
Allow to dry before operating or storing.
If the heater has collected dust or dirt inside
the unit or around any elements, have the unit
cleaned by a qualified service agent. Do not
operate the heater in this condition.
STORAGE
When not in use, store the ceramic heater
upright in a cool, clean and dry location.
HINTS & TIPS TO RETAIN HEAT
• Don't overheat your home. The temperature
of a heated room in winter should be 18–21°C.
• Your heater will work more efficiently if you
stick to Breville's recommended clearance
spaces.
• Choose the right size heater for the room type
you want to heat.
• Zone off unoccupied rooms by closing
doors and only heat the main living areas.
Fit window coverings like curtains to halve
winter heat loss.
• Put draft stoppers, such as a rolled up towel,
at the bottom of outside doorways to keep out
cold air.
• Keep the heat in and the cold out by
installing wall and ceiling insulation.
• Avoid placing items too close to the heater
(both at the front and back) for optimal air
flow.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart tilt control maxLce208Lce308

Table of Contents