Features - Breville Smart Tilt Control Instruction Book

Features

WHAT IS A CERAMIC HEATER?
Ceramic heaters are fitted with ceramic plates
which are attached to metal coils. Electricity
passes through the coils, heating the ceramic
plates, and as the ceramic continues to absorb
the heat, it then releases into the air.
The main advantage of using ceramic heating
technology is that it warms instantly, heating
quickly. The fan also acts as a distributor for
the heat, allowing for more even distribution.
SAFETY FEATURES
ThermoSecure™ Protection
Your Breville ceramic heater is fitted with a
safety device that automatically switches off
the ceramic heater in the event of overheating.
Should this ceramic heater stop working, turn
off the ceramic heater and inspect the front
grille and back fan grille for blockages. Wait
until the ceramic heater is fully cooled for the
protection system to reset before attempting to
restart the ceramic heater. If the ceramic heater
fails to operate or the safety device switches off
again, take the ceramic heater to an authorised
Breville Service Centre for examination or
repair.
SAFETY TIP-OVER CUT-OUT SWITCH
The ceramic heater comes with a safety tip-
over switch fitted to the base. If the ceramic
heater is accidentally tipped over, it will stop
operating. Press the Power/Wi-Fi button once
to commence operation.
NOTE
Lifting and moving the ceramic heater will
activate the tip-over switch, disrupting the
power to the heater.
10