Table of Contents
Advertisement
Functions
MODE
This Breville ceramic heater has 4 operating
modes: SMART ECO, LOW HEAT (LO), HIGH
HEAT (HI) & FAN ONLY (FA).
NOTE
The ceramic heater will default to Smart Eco
Mode when first used, thereafter starting in the
last chosen mode before it was turned off.
to choose a heat setting between
Press
Smart Eco, Low (LO on display screen), High
(HI on the display screen) and Fan only (FA on
the display screen) The
on any mode.
WARNING
To avoid overheating, do not cover the heater.
SMART ECO MODE
Smart Eco Mode automatically adjusts the
operating mode based on the room temperature
to operate both for efficiency and comfort. Smart
Eco Mode is the default operating mode when
the ceramic heater is first used.
• When on Smart Eco mode the room
temperature will display on the display screen,
and
will illuminate.
• The default temperature setting is 25 degrees
unless manually selected.
HEAT MODES LO & HI
• Press
to choose a heat setting between
Low ( LO on display screen), and High ( HI on
the display screen).
• During operation the built-in thermostat
will turn the ceramic heater off and on at
the chosen heat setting to maintain the
programmed room temperature.
FA
FAN MODE
• When on FAN mode 'FA' will display on the
display screen.
• The fan helps to circulate the air without
heating.
12
icon will illuminate
SET TEMPERATURE
• The temperature on this ceramic heater
can be manually set between 5 – 35 degrees
Celsius on any mode except FAN.
• Select the operating mode, then press the
&
buttons to toggle between 5 – 35
degrees in 1 degree increments to the desired
temperature.
• The set temperature will flash, then
remain solid on the display screen. The
display screen will toggle between the
set temperature and the current ambient
temperate while in operation.
NOTE
Select the High heat setting to quickly heat the
room to the desired temperature setting.
TIMER
The ceramic heater comes with a 12 hour auto-
off TIMER that can be set in 1 hour intervals
and switches the ceramic heater off and returns
to standby after the set number of hours have
elapsed. The TIMER can be set when using
any operating mode.
• To set the timer, touch the
the desired number of hours is displayed
on the LED display and the
illuminates.
• The ceramic heater will operate on the
selected mode and automatically turn off
once the time has elapsed.
• The LED display will indicate the operating
mode selected once the timer begins. To
check the remaining time on the LED display,
touch the TIMER button once.
• To cancel the TIMER any time, touch the
button until '0H' is displayed on the LED
display screen until the
illuminates.
&
button until
symbol
&
symbol no longer
Advertisement
Table of Contents
