Edit From A Camcorder Or Another Vcr - JVC HR-J6006UM Instructions Manual

30
EN
Edit From A
Camcorder Or
Another VCR
Recorder
VIDEO IN
Player
Camcorder
or
Another VCR
Player
Downloaded from: https://www.usersmanualguide.com/
Your VCR
AUDIO IN
AV cable
(not supplied)
VIDEO OUT
AUDIO OUT
1 2 3
2
4 5 6
8 9
7
0
4
1
You can use a camcorder or another VCR as the player and your
VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's or the
playback VCR's VIDEO OUT and AUDIO OUT
connectors and your VCR's VIDEO IN and AUDIO IN
connectors.
For HR-J6006UM owners...
● When using a monaural camcorder or a monaural
VCR, connect its AUDIO OUT connector to the
AUDIO IN L connector on your VCR.
For HR-J4406UM owners...
● When using a Hi-Fi camcorder or a Hi-Fi VCR,
connect its AUDIO OUT L connector to the AUDIO
IN connector on your VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into your VCR and
the playback cassette into the camcorder or the
playback VCR.
SELECT "EDIT" FOR PIC-
TURE CONTROL SET MODE
3
Follow the "Picture Control" section on page 17, then
select "EDIT".
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after finish dubbing the tape.
SET RECORDER'S INPUT
MODE
4
Press NUMBER key "0" to set your VCR to F-1.
START PLAYER
5
Set the camcorder or the playback VCR to its play
mode.
NOTE:
If the camcorder or another VCR is equipped with a
superimpose/OSD disable feature then set its superim-
pose or display feature to "OFF" before pressing play.
START RECORDER
6
Set your VCR to its record mode.
EDITING (cont.)