Express Timer Programming - JVC HR-J6006UM Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

24
EN
Express Timer
Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
NUMBER "0"
START+/–
PROG
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
4
5
6
7
8
9
0
4
TV PROG+/–
1
TIMER RECORDING
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load it into the VCR.
● The VCR comes on, and the counter is reset,
automatically.
ACCESS PROGRAM
SCREEN
2
Press PROG. (If you're just
starting out,
"PROGRAM 1" appears.)
SET PROGRAM START TIME
3
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
SET PROGRAM STOP TIME
4
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
SET PROGRAM DATE
5
Press DATE +/–. (The current date is displayed on
screen. The date you enter appears in its place.)
SET CHANNEL NUMBER
6
Press TV PROG +/–.
● Holding down TV PROG +/– rapidly scans through
the channels.
● If you are using a cable box, enter the cable box
channel, not the channel to be recorded. The channel
to be recorded must be selected on the cable box.
(The cable box channel is the VCR's channel that
displays the channels received by the cable box.)
● To timer-record cable or satellite channels through an
external tuner connected to the VCR's external input
connectors, press the NUMBER key "0" so that "F-1"
appears instead of a channel number.
pg. 6 or 9).
PROGRAM 1
START
STOP
– –:– –AM = – –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/–, SP/EP, 8=DAILY,
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
PROGRAM 1
START
STOP
8:00 AM
= – –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/–, SP/EP, 8=DAILY,
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hr-j4406um

Table of Contents