Bradford White RE380T6 Manual page 10

Water Connections continued-
This w ater heater can deliver scalding temperature w ater at any faucet
in the system. Be careful w henever using hot w ater to avoid scalding
injury. Certain appliances, such as dishw ashers and automatic clothes
w ashers, may require increased temperature w ater. By setting the
thermostat on this w ater heater to obtain increased temperature w ater
required by these appliances, you may create the potential for scald
injury. To protect against injury, you should install an ASSE approved
mixing valve in the w ater system. This valve w ill reduce point of
discharge temperature by mixing cold and hot w ater in branch supply
lines. Such valves are available from the manufacturer of this w ater
heater or a local plumbing supplier. Please consult w ith a plumbing
professional.
APPROXIMATE TIME/TEMPERATURE RELATIONSHIPS IN SCALDS
120°F (49°C)
125°F (52°C)
130°F (54°C)
135°F (57°C)
140°F (60°C)
145°F (63°C)
150°F (66°C)
155°F (68°C)
Water temperature over 125°F
(52°C) can cause severe burns
instantly or death from scalds.
Children, disabled and elderly
are at highest risk of being
scalded.
Review this instruction manual
before setting temperature
at water heater.
Feel water before bathing or
showering.
Temperature limiting valves are
available.
10
More than 5 minutes
1½ to 2 minutes
About 30 seconds
About 10 seconds
Less than 5 seconds
Less than 3 seconds
About 1½ seconds
About 1 second