Advertisement
(f)
Boot Priority
This option specifies the priority of the disk drive from which the computer
attempts to load the operating system when you turn it on.
NOTE: If you turn the T4850CT on while pressing the F10 key, the
system attempts to load the operating system in the reverse order that
you set by using this option. However, the option setting is not affected
by simply pressing the F10 key.
(g)
Sound I/O Address
This option enables or disables the sound system. When the sound system is
enabled, you can select the sound I/O base address.
If you enable this option, the POWER sub-window appears.
Power
This option enables or disables the system speaker.
Setting this option Off disables the sound system so that you can save
more battery power than setting the Windows' Sound System's audio
value to zero.
T4850CT
FDD → HDD
FDD A → FDD B → HDD
HDD → FDD
HDD → FDD A → FDD B
0530H
0604H
0E80H
Disabled
On
The sound system's power is always on.
Off
The sound system's power is always off.
3-63
Advertisement
