One for All URC-5650 Cinema 5 User Manual page 8

Sansui 0321
Sony 0220, 0689
Soundesign 0078
Technics 0308
Victor 0331
Wards 0013, 0078
Yamaha 0354
Setup Codes For Miscellaneous
Aiwa 0010, 0159
Fisher 0052
Harman/Kardon 0477
Jerrold 0459, 0520
JVC 0073
Nikko 0376
Paramount Pictures 0317
RCA 0056
Schneider 0376
Scientific Atlanta 0460
Sony 0010, 0159
Soundesign 0376
SSI 0317
Starcom 0459
Yorx 0376
RE-ASSIGNING DEVICE KEYS
You can use the Cinema 5 to operate a second TV or a second VCR or any
combination of five home entertainment components. For example, you
may want your Cinema 5 to control 1 TV, 1 Cable Converter, 1 Receiver
and 2 DVD Players. To accomplish this, you must re-assign one of the
device keys to operate the desired component, in this case, a second DVD.
The chart below shows you how to re-assign a particular device key and
then set up your new component.
TV to VCR SETUP* + 992 + VCR + TV + TV + SETUP*+
VCR code
TV to DVD/LD SETUP* + 992 + DVD/LD + TV + TV + SETUP* +
DVD or LD Player code
TV to RCVR SETUP* + 992 + RCVR + TV + TV + SETUP* +
Audio code
TV to CBL/SAT SETUP* + 992 + CBL/SAT + TV + TV + SETUP* +
Cable/DBS code
VCR to TV SETUP* + 992 + TV + VCR + VCR + SETUP* + TV
code
VCR to DVD/LD SETUP* + 992 + DVD/LD + VCR + VCR +
SETUP* + DVD or LD Player code
VCR to RCVR SETUP* + 992 + RCVR + VCR + VCR + SETUP* +
Audio code
VCR to CBL/SAT SETUP* + 992 + CBL/SAT + VCR + VCR +
SETUP* + Cable/DBS code
DVD/LD to TV SETUP* + 992 + TV + DVD/LD + DVD/LD +
SETUP* + TV code
DVD/LD to VCR SETUP* + 992 + VCR + DVD/LD + DVD/LD +
SETUP* + VCR code
DVD/LD to RCVR SETUP* + 992 + RCVR + DVD/LD + DVD/LD +
SETUP* + Audio code
DVD/LD to CBL/SAT SETUP* + 992 + CBL/SAT + DVD/LD + DVD/LD +
SETUP* + Cable/DBS code
RCVR to TV SETUP* + 992 + TV + RCVR + RCVR + SETUP* +
TV code
RCVR to VCR SETUP* + 992 + VCR + RCVR + RCVR + SETUP* +
VCR code
RCVR to DVD/LD SETUP* + 992 + DVD/LD + RCVR + RCVR +
SETUP* + DVD or LD Player code
RCVR to CBL/SAT SETUP* + 992 + CBL/SAT + RCVR + RCVR +
SETUP* + Cable/DBS code
CBL/SAT to TV SETUP* + 992 + TV + CBL/SAT + CBL/SAT +
SETUP* + TV code
CBL/SAT to VCR SETUP* + 992 + VCR + CBL/SAT + CBL/SAT +
SETUP* + VCR code
CBL/SAT to DVD/LD SETUP* + 992 + DVD/LD + CBL/SAT + CBL/SAT +
SETUP* + DVD or LD code
CBL/SAT to RCVR SETUP* + 992 + RCVR + CBL/SAT + CBL/SAT +
SETUP* + Audio code
*NOTE: Here (*) you must hold SETUP until the Cinema 5's red light blinks
twice.
Audio
PROGRAMMING THE MACRO KEY
The Cinema 5 has a Macro key (MACRO) that allow the user to play back a
series of keystrokes, at any time, with the press of the key. For example, to set
up a sequence that will turn on your components and change the components to
the proper inputs:
1. Press and hold SETUP until the Cinema 5 's red
light blinks twice, then release SETUP.
9 - 9 - 5
9 - 9 - 5
2. Press 9 - 9 - 5. The Cinema 5 's red light will blink
twice.
3. Press and release the MACRO key. This will be the key
that will play back the series of keystrokes assigned to that
key.
4. Begin entering the sequence of keystrokes, up to 15, that
you wish to be played back when you press the MACRO
key. To play back the macro you need to press the MACRO
key. For example:
RCVR + POWER + TV + POWER + TV/VCR (To change
the input on the TV to VIDEO 1) + CBL/SAT + POWER.
5. Once your sequence is entered, press and hold SETUP
until the Cinema 5 's red light blinks twice.
Now, using the example above, whenever the programmed MARCO key is
pressed, the Receiver would power ON, the TV will power ON and change the
input to VIDEO 1 and then the Satellite would power ON.
VOLUME LOCK
Volume Lock allows the user to designate which component will control the
volume in the TV, DVD/LD and CBL/SAT modes. To set the Volume Lock to the
TV mode:
1. Press and hold SETUP until the Cinema 5 's red
lightblinks twice, then release SETUP.
9 - 9 - 3
2. 9 - 9 - 3 Press 9 - 9 - 3. The Cinema 5 's red light will blink
twice.
Press and release TV. The Cinema 5' s red light will
3.
blink twice.
Now, whenever you press VOL , VOL
CBL/SAT modes your TV will control the volume. If you would like to change the
Volume Lock setting to the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3,
only substitute the appropriate device key. Setting the Volume Lock to the TV,
VCR, DVD/LD or CBL/SAT mode will not effect the volume control in the RCVR
mode.
You can also change the Volume Lock setting so that an Audio component
controls the volume in all device modes. To change the Volume Lock setting on
the Cinema 5 to the RCVR mode:
Press and hold SETUP until the Cinema 5 's red
1.
light blinks twice, then release SETUP.
2. Press 9 - 9 - 3. The Cinema 5 's red light will blink
9 - 9 - 3
9 - 9 - 3
twice.
3. Press and release RCVR. The Cinema 5 's red light
will blink twice.
Now, whenever you press VOL , VOL
control the volume in all device modes.
You can also change the Volume Lock setting so that each component controls
its own volume. However, some components do not have volume control.
Using this setting may eliminate volume control in some device modes. To
change the Volume Lock setting on the Cinema 5 so each mode controls its
own volume:
Press and hold SETUP until the Cinema 5 's red
1.
light blinks twice, then release SETUP.
9 - 9 - 3
9 - 9 - 3
2. Press 9 - 9 - 3. The Cinema 5 's red light will blink
twice.
3. Press and release VOL . The Cinema 5 's red light
will blink twice.
or MUTE in the VCR, DVD/LD and
or MUTE your Audio component will