One for All URC-5650 Cinema 5 User Manual page 5

DVD/LD Brand:
Locate the brand name of your DVD or Laser Disc Player in the "Setup Codes
For DVD or Laser Disc Players" section. The brands are listed in alphabetical
order with the most popular codes listed first. You will use one of these codes to
program your Cinema 5 to operate your DVD or Laser Disc Player.
To program the Cinema 5 to operate your DVD or Laser Disc Player:
1. Turn on your DVD or Laser Disc Player and insert a disc.
2. Press DVD/LD and release. Press and hold SETUP until
the Cinema 5 's red light blinks twice, then release SETUP.
3. Enter the first four-digit DVD or Laser Disc Player code
listed for your brand in the "Setup Codes For DVD or Laser
Disc Players" section. If you perform this procedure
correctly, the red light will blink twice when you enter the
final digit of your code.
4. Aim the Cinema 5 at your DVD or Laser Disc
Player and press POWER. Your DVD or Laser Disc Player
should turn off. If your DVD or Laser Disc Player does not
respond, repeat steps 2-4, trying each code listed for your
brand until you find the one that operates your DVD or
Laser Disc Player.
Your Cinema 5 is now programmed to operate your
5.
DVD or Laser Disc Player. Write your DVD or Laser Disc
Player code in the boxes to the left for future reference.
Remember, if you want to use your Cinema 5 to operate your DVD or Laser Disc
Player, press the DVD/LD key first.
Setup Codes for DVD Players
JVC 0558
Kenwood 0534
Mitsubishi 0521
Panasonic 0490
Philips 0539
Pioneer 0525
RCA 0522
Sony 0533
Toshiba 0503
Zenith 0503
Setup Codes for Laser Disc Players
Mitsubishi 0059
NAD 0059
Pioneer 0059
Sony 0193, 0201
Programming the Cinema 5 to operate your Receiver/Tuner:
Locate the brand name of your Receiver/Tuner and then write it in the space
below.
Receiver/Tuner Brand:
Locate the brand name of your Receiver/Tuner in the "Setup Codes For
Receivers/Tuners" section. The brands are listed in alphabetical order with the
most popular codes listed first. You will use one of these codes to program your
Cinema 5 to operate your Receiver/Tuner.
To program the Cinema 5 to operate your Receiver/Tuner:
1. Turn on your Receiver/Tuner.
2. Press RCVR and release. Press and hold SETUP until the
Cinema 5' 's red light blinks twice, then release
SETUP.
3. Enter the first four-digit Receiver/Tuner code listed for your
brand in the "Setup Codes For Receivers/Tuners" section.
If you perform this procedure correctly, the red light will
blink twice when you enter the final digit of your code.
4. Aim the Cinema 5 at your Receiver/Tuner and
press POWER. Your Receiver/Tuner should turn off. If your
Receiver/Tuner does not respond, repeat steps 2-4, trying
each code listed for your brand until you find the one that
operates your Receiver/Tuner.
5. Your Cinema 5 is now programmed to operate your
Receiver/Tuner. Write your Receiver/Tuner code in the
boxes to the left for future reference.
Remember, if you want to use your Cinema 5 to operate your Receiver/Tuner,
press the RCVR key first.
Setup Codes For Receivers/Tuners
ADC 0531
Aiwa 0121, 0158, 0189
Capetronic 0531
Carver 0008, 0042, 0189, 0360
Casio 0195
Clarinette 0195
Denon 0004
Emerson 0424
Fisher 0042, 0219, 0360
Garrard 0424, 0463
Harman/Kardon 0110
JVC 0074
Kenwood 0027, 0313, 0314, 0077, 0186
Koss 0424
Linn 0189
Lloyd's 0195
LXI 0181
Magnavox 0189, 0195, 0531
Marantz 0039, 0189
MCS 0039
Modulaire 0195
NAD 0320
Nakamichi 0347
Onkyo 0135
Optimus 0042, 0080, 0177, 0181, 0186, 0219, 0531,
0670
Panasonic 0039
Penney 0195
Philips 0189
Pioneer 0014, 0080, 0150, 0531, 0630
Quasar 0039
RCA 0054, 0360, 0531
Realistic 0163, 0181, 0195
Sansui 0189
Sanyo 0219
Scott 0163, 0322
Sharp 0186
Sherwood 0491, 0502
Sony 0158, 0474
Soundesign 0670
TEAC 0163, 0463
Technics 0039, 0309, 0518
Victor 0074
Wards 0014, 0042, 0054, 0080, 0158, 0189
Yamaha 0176, 0186
Yorx 0195