Satellite View - Garmin GPSMAP 696 Owner's Manual

SATELLITE VIEW

The Satellite View displays satellite imagery above 20nm.
Displaying/removing satellite imagery on the map page:
1) Press the MAP Softkey on the Map Page. Press the VFR MAP Softkey (if
necessary).
2) Press the SAT VIEW Softkey. Satellite imagery is displayed on the map.
3) Press the SAT VIEW Softkey again to remove satellite imagery from the
Navigation Map.
Or:
1) From the Map Page, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map', and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'Map' Category from the horizontal
list.
4) Move the FMS Joystick to highlight the 'Satellite View' field.
5) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.
VFR MAP Softkey
190-00919-00 Rev. E
Satellite View (Map Page)
Garmin GPSMAP 695/696 Owner's Manual
GPS Navigation
SAT VIEW Softkey
53