Garmin GPSMAP 640 Owner's Manual page 55

Hide thumbs Also See for GPSMAP 640:
Table of Contents

Advertisement

• World Map—toggle the world map (basemap) between a basic
world map and a full world map.
◦ The basic world map shows coastal outlines of the world,
with land indicated in yellow.
◦ The full world map shows the coastal outlines of the world
with the land covered in a low-resolution photo image.
• Spot Depths—turn on spot soundings and set a dangerous
depth.
• Safety Shading (with compatible BlueChart g2 Vision cards)—
areas with depths shallower than the specified value are shaded
in blue, while areas with depths greater than the specified value
are shaded in white. The contour is always drawn at, or deeper
than, the selected depth. Select
Select
Auto
to use the depth from the g2 Vision chart.
• Symbols—customize the symbols that appear on the Navigation
chart.
◦ Navaid Size—adjust the size of the symbols shown on the
map.
◦ Navaid type—set the navaid symbol set: National Oceanic
and Atmospheric Administration (NOAA) or International
Association of Lighthouse Authorities (IALA).
GPSMAP 620 and GPSMAP 640 Owner's Manual 
Manual
to enter the depth.
◦ Land pois—toggle Points of Interest (POI) icons shown on
land (this option is only available when using a BlueChart
g2 Vision SD card).
◦ Light Sectors—show the sector in which a navigational
on
light is visible. Select
or select
Auto
to allow the chartplotter to automatically
filter out light sectors depending on the zoom level.
◦ Chart Borders—show what area the maps cover when
using a BlueChart g2 Vision data card.
Understanding How Wind VMG and Waypoint
VMG Are Displayed in the Data Bars
The chartplotter automatically switches between displaying Wind
Velocity Made Good (VMG) and Waypoint VMG in the data bars.
Waypoint VMG is displayed under the following conditions:
• The Route Leg data bar displays Waypoint VMG when you are
navigating a route or an Auto Guidance line.
• The Sailing data bar displays Waypoint VMG when you are
navigating a route or an Auto Guidance line, and you turn the
Route Leg data bar off.
Marine Mode: Advanced Configuration
to show light sectors at all times,
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 620

Table of Contents