Wiring The Power Cable - Garmin GPSMAP 5215 Installation Instructions Manual
Gpsmap 4000 series; gpsmap 5000 series
Hide thumbs
Also See for GPSMAP 5215:
- Owner's manual (116 pages) ,
- Important safety information (4 pages) ,
- Technical reference (42 pages)
Table of Contents
Advertisement
5. Insert the O-ring into the end of the connector.
Installing a Locking ring
Wiring the Power Cable
The GPSMAP 4000/5000 series chartplotter must be connected to the power supply for the boat. Use the 2-pin power cable included, and
connect the power (red) and ground (black) wires.
NOTES:
• Use 14 AWG shielded wiring for extended runs of wire to the power cable.
• Solder all connections and seal them with heat-shrink tubing.
GPSMAP 4000/5000 Series Installation Instructions
9
Hide quick links:
Advertisement
Table of Contents
