Radio Settings - Garmin Rino 655t Owner's Manual

Monitoring for activity
You can monitor a single channel for
any activity, including static and weak
voice signals. This is helpful if a signal
is going out of range.
Select Radio > Monitor.

Radio Settings

Select > Setup Radio.
• Send Location—enables you to
send your current location after
each transmission
• Allow Polling—enables polling.
Polling allows another Rino user to
get your location by sending a poll
request.
• Power Level—adjusts power level
on GMRS frequencies.
• Weather Alert—allows you to
search for weather alerts on the
current channel or all available
channels.
Rino 600 Series Owner's Manual
(page 11).
• Squelch tone Mode:
◦ CtCSS—Continuous Tone
Controlled Squelch System
allows you to ignore unwanted
calls from persons using the
same channel.
◦ DCS—Digital-Coded Squelch
allows you to ignore unwanted
calls from persons using the
same channel.
• Repeater Channel—enables the
GMRS repeater channels 15R-22R.
GMRS repeater channels are
not available on devices sold in
Canada. Position reporting is not
allowed by the FCC on repeater
channels.
• Headset type—allows you to
select the type of headset you are
using. To purchase accessories, go
to http://buy.garmin.com
your Garmin dealer.
Radio
or contact
9