Ai-900Ti Tie-Line Interface Card Exchange Interconnection - Aiphone AI-900 Installation Manual

12.9. AI-900TI Tie-Line Interface Card Exchange Interconnection

Up to 16 exchanges can be tie-line interconnected using the AI-900TI card.
[Connection]
To interconnect the exchanges, use 2 twisted pair cables for voice lines, and a 2-core shielded cable for data
lines. A maximum of 4 voice lines can be connected. Refer to the following table for the maximum
recommended length for each cable type between exchanges.
(As to the cable connection, see the figure on the next page.)
Cable type AWG24 (0.52 mm)
Distance 0.6 km
[Termination resistance setting]
When interconnecting three or more exchanges, change the SJP10 connection on each card as shown below,
with the exception of the cards in the rightmost and leftmost exchanges.
Factory-preset status of SJP10
R26
CN6
SJP10
AI-900TI
36
AWG22 (0.65 mm)
1 km
SJP10
SW1
AWG20 (0.82 mm)
1.5 km
Termination resistance setting when
interconnecting 3 or 4 exchanges
AI-900
AI-900TI
AI-900
AI-900TI
AI-900
AI-900TI
AI-900
AI-900TI
Two twist pair cables (voice line)
A 2-core shielded cable (data line)
SJP10
SJP10
SJP10
SJP10