Epson Endeavor Pro User Manual page 95

Chapter- 5
Installing and Removing Drives in the
Slimline Computer
This chapter describes how to install and remove optional
drives in your slimline computer. You can use these
instructions to install a variety of devices, such as hard disk
drives, diskette drives, CD-ROM drives, or other devices.
Note
This chapter describes installing and removing drives in the
slimline computer; if you have a tower computer, see
Chapter 6.
Although your drive may look different from the ones
illustrated here, you should be able to install it the same way.
If you are reading this manual online, be sure to print out
this chapter before performing any of the steps it describes.
Follow the instructions in this chapter to do the following:
Set the IDE device jumpers
Remove the drive mounting bracket
Install a hard disk drive in the mounting bracket
Remove a hard disk drive from the mounting bracket
Install a drive in an externally accessible drive bay
Remove a drive from an externally accessible drive bay.
Installing and Removing Drives in the Slimline Computer
5-1