Epson Endeavor Pro User Manual page 50

In order to install the drivers, you need to create install
diskettes using the utility program on your computer. See the
User S Digest for instructions. Once you create the diskettes, you
can install drivers for these programs:
®
IBM OS/2
®
SCO UNIXversions 3.2.4 and higher (3.2.4.X)
®
NetWare versions 3.1 and higher (3.1X)
Before you install the PC1 IDE drivers, make sure you back up
your hard disk drive. Then use the installation program on the
PC1 IDE Drivers diskette to install the drivers.
N o t e
Make sure you use the installation program to install the PC1
IDE drivers; if you simply copy the driver files, they won't
work correctly.
The driver files for each of the programs listed above are in
their own directory on the PC1 IDE Drivers diskette. Log onto
the directory for each driver you want to install and print out
the README file. Refer to the information in these files for
additional instructions on installing and using the PC1 IDE
drivers.
®
versions 2.0 and higher (2.X)
Running SETUP and Installing Drivers
2 - 2 1