Replacing The Bracket In The Computer - Epson Endeavor Pro User Manual

Secure the drive with the screws that came with it;you can
3.
use two or four screws, depending on the location of the
holes in your drive.

Replacing the Bracket in the Computer

Follow these steps to replace the bracket in your computer:
Lower the bracket into the mounting area and slide it
1.
forward, inserting the front of the diskette drive through
the drive slot in the front panel of the computer.
Make sure the holes in the bracket are aligned with the holes
2.
in the drive bay and brace. Then secure the bracket with the
screws you removed previously.
Installing and Removing Drives in the Slimline Computer
5 - 7