Vauxhall New Crossland Owner's Manual page 246

244 Vehicle care
2. Remove the light assembly by
pulling it straight back.
3. Remove the bulb socket.
a) Version without LED:
Remove the three screws and
take out.
b) Version with LED:
Remove from the light assembly
by turning it anticlockwise.
4. Remove the bulb.
a) Version without LED:
Pull and replace.
1 : tail light / brake light
2 : turn light
b) Version with LED:
Pull straight out to remove from
the socket and replace.
Attaching the light assembly
1. Depending on version, attach the
bulb carrier to the light assembly
and secure with the three screws
or attach turn light bulb socket.