Vauxhall New Crossland Owner's Manual page 191

As soon as the driven wheels starts to
spin, engine output is reduced and
the wheel spinning the most is braked
individually. This considerably
improves the driving stability of the
vehicle on slippery road surfaces.
Electronic Stability Control and the
Traction Control system are
operational after each engine start as
soon as the control indicator J
extinguishes.
When Electronic Stability Control or
the Traction Control system operates,
J flashes.
When Electronic Stability Control or
the Traction Control system is not
operational, J illuminates
accompanied by a message in the
Driver Information Centre.
After reconnecting the vehicle
battery, the system needs a
recalibration by driving a short
distance.
9 Warning
Do not let this special safety
feature tempt you into taking risks
when driving.
Adapt speed to the road
conditions.
Control indicator J 3 73.
Deactivation
Driving and operating
Electronic Stability Control and the
Traction Control system can be
deactivated, everytime it is required:
press K.
Control indicator K illuminates 3 73.
A status message appears in the
Driver Information Centre.
Electronic Stability Control and the
Traction Control system are
reactivated by pressing the K button
again, by applying the brake or in the
case that the vehicle is driven faster
than 30 mph.
K extinguishes when Electronic
Stability Control and the Traction
Control system are reactivated.
Electronic Stability Control and the
Traction Control system are also
reactivated the next time the ignition
is switched on.
Fault
If there is a fault in the system, the
control indicator J illuminates
continuously and a message appears
in the Driver Information Centre. The
system is not operational.
189