Vauxhall New Crossland Owner's Manual page 216

214 Driving and operating
● Zoom view
● 180° view
Auto mode is activated by default. In
this mode, the system selects the
best view, standard or zoom, to
display according to the information
from the ultrasonic parking sensors.
The state of the system is not kept in
memory when the ignition is switched
off.
Rear view
The area behind the vehicle is
displayed in the screen. The vertical
lines represent the width of the
vehicle with mirrors unfolded. The
direction of the lines changes with the
steering angle.
The horizontal lines represent a
distance of about 30 cm, 1m and 2 m
beyond the rear bumper.
This view is available in auto mode or
in the view selection menu.
Auto mode
This mode is activated by default. If
the vehicle is equipped with ultrasonic
parking sensors, the automatic view
changes from rear view or front view
to a view from above, as an obstacle
is approached during a manoeuvre.
If the vehicle is not equipped with
ultrasonic parking sensors, the view
needs to be changed manually in the
Info Display.
Zoom view
The camera records the vehicle's
surroundings during the manoeuvre
in order to reconstruct a view from
above the rear of the vehicle in its
near surroundings, allowing the
vehicle to be manoeuvred around
obstacles nearby. This view is
available with auto mode or in the
view selection menu.