Dell PowerEdge R6625 Installation And Service Manual page 190

Figure 175. Quick resource locator for combo rails
B4 static rails summary
The static rails offer a greater adjustability range and a smaller overall mounting footprint than the sliding rails because of their
reduced complexity and lack of need for CMA support. The static rails support a wider variety of racks than the sliding rails.
However, they do not support serviceability in the rack and are thus not compatible with the CMA. The static rails are also not
compatible with SRB.
Figure 176. Static rails
Static rails features summary
Static rails for 4-post & 2-post racks:
● Supports stab-in installation of the chassis to the rails.
● Support tool-less installation in 19" EIA-310-E compliant square or un-threaded round hole 4-post racks including all
generations of Dell racks.
● Support tooled installation in 19" EIA-310-E compliant threaded hole 4-post and 2-post racks.
● Support for tooled installation in Dell Titan or Titan-D rack.
NOTE:
● Screws are not included with the static rail kit since racks are offered with various thread types. The screws are
provided for mounting static rails in racks with threaded mounting flanges.
● Screw head diameter should be 10 mm or less.
2-Post racks installation
190 Installation