Table of Contents
Advertisement
Figure 115. Removing the expansion card riser (Riser 1)
3. For Riser 2A, press the blue button on the riser and holding the touch points (two strips on one side; one strip on the other
side) lift the expansion card riser from the riser connector on the system board.
Figure 116. Removing the expansion card riser (Riser 2)
4. For Riser 3A, loosen the captive screw, and then press the blue release tab and holding the edges lift the expansion card
riser from the riser connector on the system board.
142
Installing and removing system components
Advertisement
Table of Contents
