Table of Contents
Advertisement
Table 1. Features available on the front of the 4 x 3.5-inch drive system (continued)
Item
Ports, panels, and
slots
2
Drive
3
Video Connector
4
Right control panel
5
Express Service Tag
Figure 2. Front view of the of 8 x 2.5-inch drive system
Table 2. Features available on the front of the 8 x 2.5-inch drive system
Item
Ports, panels, and
slots
1
Left control panel
2
Drive
3
Right control panel
10
System overview
Icon
Description
be used in troubleshooting the system. You can access system
inventory, Dell Lifecycle Controller logs or system logs, system
health status, and also configure iDRAC, BIOS, and networking
parameters. You can also launch the virtual Keyboard, Video, and
Mouse (KVM) viewer and virtual Kernel-based Virtual Machine
(KVM), on a supported mobile device. For more information, see
the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals
N/A
Enables you to install drives that are supported on your system.
Enables you to connect a display device to the system. For more
information, see the
N/A
Contains the power button, VGA port, USB port, iDRAC Direct
(Micro-AB USB) port, and the iDRAC Direct status LED.
N/A
The Express Service Tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address, and so
on. If you have opted for the secure default access to iDRAC, the
Information tag will also contain the iDRAC secure default password.
Icon
Description
N/A
Contains the system health, system ID and the status LED indicator.
NOTE:
certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the Status LED indicators section. Indicates if
the iDRAC Quick Sync 2 wireless option is activated. The Quick
Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory
and various system level diagnostic/error information that can
be used in troubleshooting the system. You can access system
inventory, Dell Lifecycle Controller logs or system logs, system
health status, and also configure iDRAC, BIOS, and networking
parameters. You can also launch the virtual Keyboard, Video, and
Mouse (KVM) viewer and virtual Kernel-based Virtual Machine
(KVM), on a supported mobile device. For more information, see
the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals
N/A
Enables you to install drives that are supported on your system.
N/A
Contains the power button, VGA port, USB port, iDRAC Direct
(Micro-AB USB) port and the iDRAC Direct status LED.
www.dell.com/poweredgemanuals
The iDRAC Quick Sync 2 indicator is available only on
section.
Advertisement
Table of Contents
