Epson Apex User Manual page 74

3. At the prompt, type:
A>
DISKCOPY A: B:
and press
Enter.
4. MS-DOS prompts you to insert your diskettes. You see
these messages:
Insert SOURCE diskette in drive A:
Insert TARGET diskette in drive B:
Press any key when ready ...
5. Insert the diskette you want to copy from (the source) in
drive A and the diskette you want
in drive B. Then press any key.
DISKCOPY checks to see if the destination diskette is
formatted. If it is not, DISKCOPY formats the diskette.
You see the message:
Formatting while copying
The copy operation begins when the format is complete.
You see this message:
Copying 40 tracks
9
sectors/track,
When the copy is complete, you see these messages:
Copy complete
Copy another (Y/N)?
6. Press Y to perform another copy or
DISKCOPY command.
to
2
side(s)
N
Using MS-DOS with Your Apex 3-17
copy to (the target)
to end the