Epson Apex User Manual page 41

To set the real time clock, follow these steps:
1. If you are using the Apex Plus, insert the GW-BASIC
diskette into drive A. At the command prompt, type the
following and press
SETRTC /I
The screen displays a prompt similar to this:
Set Real Time Clock Ver.
Current Time is
Enter New Time:
2. Using a 24 hour format, type the new time and press
Use colons to separate the hours, minutes, and
Enter.
seconds. It's not necessary to type the seconds.
The screen then displays a prompt similar to this:
Current Date is
Enter New Date (mm-dd-yy) :
3. Type the new date and press
the month, day, and year.
4. The screen displays the current time and date you set and
returns you to the command prompt.
1-26 Setting Up Your
Enter:
Enter.
System
1.00
12:05:31
Wed 05-25-88
Use dashes to separate