Following figures show the configuration for total onboard system
memory.
Table 2-2: Settings of Jumpers W1- W6
Before setting up
following table to set the watt state and the page-interleave mode.
Particularly, you cannot set both 0 wait state and disabled page-
interleave mode in Turbo mode;
operate normally, even cannot display the screen. In order to set both
modes normally, you should switch the button from Turbo mode to
Normal mode.
Table 2-3: Total Onboard System Memory Size
configuration in BIOS, you must refer to the
RAM
otherwise your system cannot
Chapter 2: Setting Up Your System
9