Epson PowerLite 62c User Manual page 91

You see vertical stripes or the image still looks blurry after
trying the solutions in the previous section.
If you're projecting from a computer and displaying an image that
■
contains a lot of fine detail, you may notice one or more vertical
stripes or bands, or some of the characters may look heavy or
blurred. Press the
Auto
the projector's tracking and sync settings.
If further adjustment is needed, you can fine-tune the
■
and settings manually using the Signal menu as described
Sync
on page 59.
1. Fill the screen with an image containing fine detail when
making these adjustments. For example, in Windows you can
select a pattern to appear as your desktop background. Or try
projecting black text on a white background.
2. Adjust the
Tracking
3. Adjust the
Sync
The colors of the image are not right.
Try selecting a different Color Mode. See page 56 for
■
instructions.
■ If you're displaying video, adjust the
settings on the Image menu. See page 56 for instructions.
■ Adjust the
Brightness
menu. See page 56.
■ Try adjusting the
Color Adjustment
See page 57.
■ Make sure the input signal setting on the Signal menu matches
the signal from the connected device. If the image is too purple
and you've connected a computer or RGB video device to the
Computer1(Component)
select
Computer1
connected a component video device to one of these ports, select
Component Video1
button on the remote control. This resets
to eliminate vertical stripes.
to increase the sharpness of the image.
Color Saturation
and settings on the Image
Contrast
setting on the Image menu.
or
Computer2(Component)
or as the input source. If you've
Computer2
or
Component Video2
Tracking
and
Tint
port,
. If you're
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.
Solving Problems
91