Epson PowerLite 62c User Manual page 61

3. Press . Then use the
Enter
arrow buttons) and the
■
Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular.
■
Auto Keystone
Automatically adjusts a distorted image from a trapezoid
shape to rectangular when the projector's foot is extended or
retracted. (Not available when you're projecting from the
ceiling or using rear projection.) Select
■ Operation Lock
When turned on, this function disables all projector buttons
except the P
Power
effect after you restart the projector. (After you turn off the
projector, wait for the Ppower light to turn a steady orange
before turning it on again.)
■
Pointer Shape
Lets you select from three different pointer shapes. The
Password Protect function must be cancelled first. See
page 68.
■
Brightness Control
Select lamp brightness when the projection is too bright
Low
for the room. The
consumption and fan noise. Select
maximum brightness. (Also check the
the Image menu; see page 56.)
■
Volume
Adjusts the volume for the projector's speaker.
4. When you're finished, press
pointer button (or up and down
button to set the following options:
Enter
ON
button. Changes to this setting take
setting also reduces electricity
Low
to project the
High
Brightness
or
Esc Menu.
or .
OFF
note
To cancel the Operation
Lock function from the
projector, press the
button for about seven
seconds.
setting in
Fine-tuning the Projector
Enter
61