KYMCO PEOPLE S 50 Manual page 19
Hide thumbs
Also See for PEOPLE S 50:
- Owner's manual (68 pages) ,
- Service manual (196 pages) ,
- Owner's manual (62 pages)
Table of Contents
Advertisement
CONTROLS & FEATURES
Service Indicator Reset(Noodoe Dashboard)
After you change the engine oil or the drive belt
,you need to reset the Service Indicator.
1.Push MODE button, the multifunction display
→ Belt tirp
will change (ODO→ Trip→ Oil trip
)
repeatedly in sequence.
2.Choose Oil trip mode or Belt trip，press MODE
button and ADJ button at the same time for 2
seconds and the display will turns to 0.0,the
service indicator is reset.
3.The service indicator will turn on again when
you reach next 2000KM(oil trip)or20000KM(belt
trip) .
▆ NOTE:
When the Service indicator is on, the Oil trip/
Belt trip and mileage number will flash.
.
15
Advertisement
Table of Contents
