KYMCO PEOPLE S 50 Manual page 18

Adjust clock(without noodoe)
The setting procedure:
1. Turn the ignition switch to the "
2. Push the MODE button to toggle between
ODO mode, trip mode and oil service and
choose ODO mode.
NOTE:
The digital clock can be only adjusted in
ODO mode.
3. Push both MODE and ADJ for more than
2 seconds. The "hour" digits will begin
flashing, you can adjust it by pressing ADJ
button.
4. Push the MODE button, the minute digits
will begin flashing, you can adjust it by
pressing ADJ button.
5. Push both the MODE and ADJ at the same
time to finish the clock setting.
14
CONTROLS & FEATURES
" position.
NOTE:
The adjustment will be cancelled if any
button is not pressed within approximate
ten seconds.
NOTE: The clock will be reset to 12:00 when
the battery is disconnected.