KYMCO PEOPLE S 50 Manual page 17

Ser vice Indicator Reset:
After you change the engine oil, you need to
reset the Service Indicator.
1. Push MODE button, the multifunction display
will change ODO→ Trip→ Oil service
mode) repeatedly in sequence.
2. Choose Oil service mode press MODE button
and ADJ button at the same time for 2 seconds
and the display will turn to 0.0,the service
indicator is reset.
3. The service indicator will be on again when
you reach next 2000km (oil service).
NOTE: When the Service indicator is on, the
ODO/Trip and mileage number will flash.
CONTROLS & FEATURES
(blank
13