Install Software - Epson Stylus Photo R2400 Start Here Manual

5
5

Install Software

Install Software
Windows
®
The software works with Windows 2000, XP, XP Professional x64 Edition, and Windows Vista. ™
Make sure your printer is NOT connected to your computer, then follow the steps below.
1
T urn on your computer. Wait for the system to start up,
then insert the Epson
With Windows Vista, if you see the AutoPlay window,
click Run Epsetup.exe. When you see the User
Account Control screen, click Continue.
NOTE: If you see a screen like this, click Cancel
and disconnect the printer from your computer.
Then follow the steps below.
2
R ead the license agreement that appears and click
AGREE.
3
Y ou see a message like this.
Click OK to begin installing your printer driver.
4
W hen you see this screen, follow the steps below to
connect either a USB cable or a FireWire cable.
NOTE: Windows Vista supports only a USB
connection.
USB
C onnect the square end of your USB cable to the back of your printer and the flat end of
the USB cable to your computer. (You can connect to any open port.)
NOTE: For Windows XP, if you don't have USB 2.0, you see a message. Click the
Close button to close the message.
FireWire
C onnect one end of the FireWire cable to the back of your printer and the other end to
your computer.
NOTE: If your computer uses i.Link or another 4-pin FireWire connection, you will
need to connect a 6-pin to 4-pin FireWire (IEEE 1394) cable.
5
W hen you see this screen, click Next.
CD-ROM in your drive.
®