Display Assembly - HP Compaq Presario CQ71 Maintenance And Service Manual

Display assembly

Description
17.3-inch display assembly (includes 17.3-inch 16:9 wide-aspect ratio (1600×900), white-LED
backlit, HD BrightView display panel, bezel, enclosure, hinges, camera module and cable,
microphone and cable, and 2 wireless antenna transceivers and cables)
For the Presario CQ71 Notebook PC use
For the HP G71 Notebook PC use
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Keyboard (see
b. Keyboard cover (see
Remove the display assembly:
1. Open the computer as far as possible.
2. Disconnect the display panel cable (1) from the system board and remove the cable from the cavity
between the system board and the display left hinge.
3. Disconnect the microphone module cable (2) from the system board.
66 Chapter 4 Removal and replacement procedures
Battery on page 47).
Keyboard on page 60)
Keyboard cover on page
WLAN module on page
63)
Spare part number
513762-001
513760-001
48).